繁體中文
- Immediate Benefits：
Softened Slag
Increased Fluidity of Molten metals
Less Slag Adhesion to Furnace Lining
Cleaner Riser/Feeder Head - Subsequent Benefits：
Preventing Bridging Effect
Extended furnace lining life by 10% and up
Lowered pouring temperature
Reduced casting defects
Enhanced casting physical property
Improved melting efficiency - Direction：
[Electric Induction Furnace] Apply SLAG X together with steel scraps and carbon additive or silicon carbide at the bottom of the furnace.
[Ladle] Place SLAG X at the bottom of the ladle and then the molten metals are poured onto
[Addition amount] 0.03%-0.08% of molten metals. 0.05% is suggested for the initial use. Observe the condition of the furnace lining after each run and then determine the optimal addition amount. - Application：
Gray Cast Iron/Nodular Cast Iron
Stainless Steel/ Alloy Steel
Copper Alloy Cast - Note:
Do not apply directly on the surface of the molten metals
Store in a dry atmosphere otherwise the effectiveness will be affected due to
